Archive for the ‘Designing Weavers’ Tag

Last Post of 2012

Wrapping up 2012. It was a good year. I had my work in some wonderful exhibitions; I was invited to apply to California Fibers, and joined that group; I curated an exhibition at Los Angeles International Airport; and I was selected to produce a coiled piece for the Wells Fargo Green Team Trophy.

Since my last blog post, I finished the second token for the Green Team Trophy. It will be going to the Los Angeles Virtual Team.

2ND_TokenE2ND_TokenA

 

 

 

 

 

 

 

 

 

 

 

I have woven some samples for the window shade fabric. I will soon be meeting with C & A to look at them.

IMG_1568

IMG_1569

 

 

 

 

 

 

 

 

 

 

 

Just yesterday I shared a triangle loom weaving adventure with some friends from my local guild, the Southern  California Handweavers Guild. A little group of weavers came together at Michelle Gannes’ house to learn how to weave on triangle looms. I had been curious about triangle weaving, so I borrowed a loom and joined in. I came home with my triangle about half woven and finished it in the evening. And the result was, well . . .

triangle 2. . . slightly appalling.

I figure I’ll probably add some embellishment to cover that mess in the center, then crochet an edge which will help compensate for the failure at the bottom point. As I’m thinking about it, If I use a nice bright complimentary color for the edging, it will pull attention away from the technical difficulties. Then I’ll wear it in my studio when I need a little something to keep my shoulders warm, and never take it out of the house. It will be fine.

Looking forward to 2013: along with the window shade fabric, and never weaving on a triangle loom ever again, I’ll be doing at least two more tokens for the Green Team Trophy. I’m going to attend Stitches West in February in Santa Clara, CA.  I’ll need to step up work on my Designing Weavers annual project in order to get it done by March, April, or May. I also have workshops and classes scheduled on my teaching roster thru May.  Then there is the SDA conference in San Antonio in June.

What else? I’m sure I’ll find some other things to get into – I’ll let you know.

Advertisements

Out in the Valley

A couple weeks ago I mentioned three things I had underway: my Designing Weavers piece addressing opposites, preparations for my Exploring Twills workshop, and the samples for the window shades.
November 17 & 18 was the twill workshop out in the Central Valley of California, and it was a great time. First, I had good weather for the drive out to Exeter, CA. Second, the Handweavers of the Valley are a lively and fun group of weavers.

I stayed with Judy Trimble at her beautiful home in Porterville. Her children are grown and she lives alone. Judy’s house has a room with two looms in it, just as every house should have, don’t you think?

There were 15 in the workshop, all at different levels of experience, and I had a great time spending two days with them.

I haven’t been able to work on the window shade samples. The week after the workshop was Thanksgiving week, which included Irv’s and my 25th wedding anniversary.

I have made a little progress on my DW piece, but not much.  The truth is I have more than three projects going at any one time. The Wells Fargo Green Team Trophy is an ongoing project that I needed to get a coiled piece completed for. This project came about during my long hiatus from blogging. Here is my Green Team Trophy,

Stash of Trash

and here is the second token, which I’ll be shipping soon.

 

 

 

 

 

 

 

 

 

 

 

It seems there are always side projects. This is one of the eight harness twills from my workshop. It will be a scarf, and it will be a gift for our Chanukah party on December 8th. 

This loom is sitting on a folding table in my dining room, and there’s another one on the dining table. So I not only need to finish the scarf as a gift for the party, but I’ll also need to get the looms out of the dining room so people can sit down to eat. And there’s a Baby Wolf in the living room I’ll be wheeling into my daughter’s bedroom. One of these years I should just leave all of the looms out and have everyone take turns weaving on them during the party. Wouldn’t that be fun?

Without a Paddle

So, progress. I have gotten the warp for my window shade fabric samples on the loom, and have started weaving. The warp is made up of about 10 different white yarns in different combinations. The fabric will be white with accents of neutral tans, grey, and a touch of blue.

But before I got this far, I had an adventure winding the warp – well, not quite. I averted an adventure. I saw that I was headed down a dark and mysterious path, and I retreated to the safety of What-I’ve-Always-Done. Here’s what happened:

You see, years ago – many years ago I acquired a warping paddle. . .

There it is. it’s just lovely. I think it’s maple, it has a nice finish, beautifully beveled holes, it feels good in my hand. There is just one teeny, tiny thing wrong with this warping paddle.

I don’t know how to use it.

I thought I knew: put the different yarns through the holes, run the paddle back and forth around the pegs of the warping board, wind 12 ends at a time instead of one end at a time. Alrighty then. I wound small balls of my combined yarns. I found 12 different bowls, cans, and boxes for my different yarns (or multiple balls of the same yarn I was using more than once over the 12 end “repeat”). I stuck the 12 yarns through the 12 holes, I knotted them together, I looped them over the top peg.

Then I brought the 12 yarns, neatly separated in two rows of six, past the first peg of the cross – and I stopped. How to make the cross? How do I get the bottom yarns to go over the second cross peg, and the top ones to go under it, With only two hands?

I was using one hand to hold the knotted ends on the beginning peg, and the other one holding the paddle. The 12 yarns were hanging slackly, feeding from 12 boxes, bowls and cans on the floor at my feet. I seemed to be missing a hand I would need to also hold the yarns with the minimal tension needed to keep them from falling off of the warping board. And then where was I to put the paddle when I needed my hands to untangle the yarns when they tried to wrap around each other on the floor?

It was ridunculous (a more extreme form of ridiculous). Clearly I am missing some crucial piece of information.

My sample warp is only 96 ends. I just ran it one end at a time, the old-fashioned way, and got it on the loom.

It has been a while since I’ve woven on my floor loom, and I felt I needed a warm up, so I started weaving with only the white yarns and fabric strips.

This piece is based on the window shade fabric I wove for mine and my hubby’s bedroom, but it is stiffer and tighter.

Our fabric has some fuzzy yarn with mohair, and some thick and lofty wools.

But Candy and Adam don’t want the same design as our window shades.

They don’t want the heavier wool yarns that zig-zag across my shades. Good thing, because I don’t have any more of those. The fuzzy mohair yarn doesn’t exist any more either – which is also alright because it’s not right for Candy & Adam’s living room.

I thought the sett at 8 EPI was too tight, so I resleyed it at 6 EPI. I want this fabric to be a little weft faced. I also decided I’ll just use one yarn in the warp. All the different yarns I used don’t show up. So the hassle of running a bunch of different yarns in the warp has no pay-off in the design. I have a lovely thin perle cotton that I got from Newton’s Yarn Country at Convergence this summer, and I’ll need more of it. Fortunately, Newton’s Yarn Country will be at WeFF on Sunday.

This, my weaving friends, is why we make samples.

beginnings for the first sample on the loom.

What’s Next?

Again, it’s been a while since my last post. I did clean my studio. It took much less time than I imagined it was going to. Then I launched right into my next set of projects; and those are:

Woven fabric for window shades – for cousins Candyce and Adam; 18 yards, two warps, two different widths.

A new workshopExploring Twills

Designing Weavers 2013 annual project on the theme of Opposites.

I will be leading the Exploring Twills workshop for the Handweavers of the Valley in Exeter, California on November 17 & 18; and for the Southern California Handweavers in (the San Fernando Valley) Los Angeles, on March 9 & 10, 2013. I have compiled a notebook of twill drafts that range from beginner/easy: 4H Straight Draw to intermediate/more complex: 8H Elaborate Twill.

I will be demonstrating one of the twill patterns at the SCHG Weaving and Fiber Festival (WeFF) at the Torrance Cultural Arts Center, 3350 Civic Center Drive, Torrance CA. The hours are 10:00 am – 4:00 pm. This is a fantastic Fiber-centered event. If you’ve been there, you know what I’m talking about. If you’ve never been, and you’re interested in anything that can be done with fiber, you need to check it out.

There will be a wonderful variety of demonstrations throughout the day. My demonstration times are 10-11 am; 12-1 pm; and 2-3 pm.

The window shade fabric is in the very beginning stages of design. The warp is going to be a variety of white yarns with white fabric strips, and white, tan, & light blue yarn in the weft. I’m going to make some samples first with some different treatments for the weft.

I have about 10 different white yarns. I’m currently working out the arrangement of yarns for the warp.

 

 

 

 

 

I also have a coiling project underway. This is the 2nd token to go with the Wells Fargo Green Team trophy.

 

 

 

 

 

 

 

I have a piece started for the Designing Weavers Annual Project. Here’s a sneak peek, but I’m not going to show too much of it.

%d bloggers like this: